A hand pump may be better than nothing, but you still have to work hard and waste time that you would’ve otherwise spent paddleboarding.
Inflating your SUP can be made much easier and faster with an electric pump. Sure, you’ll have to invest some cash for it, but it’s definitely a smart investment that will make a difference in the long run.
I got myself an electric pump, and there was no going back since then. In my personal opinion, the OutdoorMaster The Shark II electric pump blows everything else out of the water. Let’s explore this awesome SUP electric pump and why I’ve picked it as my favorite.
At a Glance:
The OutdoorMaster Shark does its job quite well. While many electric pumps can’t handle a heavy load, this one has proved reliable enough to make your paddle boarding trips more pleasurable.
Using this electric pump is a breeze; you’ll figure it out in a single minute thanks to the simple control buttons and the LCD screen used to display the PSI level.
Coming from an ex-hand pump user, I was impressed with what this electric pump can do.
Save 20% at OutdoorMaster! Just use coupon code HumberSport20 at the checkout.
- Fast speed
- Excellent frost cooling system
- Compact design with ergonomic built-in handle
- Easy to use
- Comes with all the needed accessories
- Auto-shutoff doesn’t work for deflation
- Relatively expensive
OutdoorMaster Shark SUP Electric Pump Review
The OutdoorMaster Shark is packed with an impressive set of features that make it stand out among the crowd. Let’s delve deep into each of its features to know more.
|Size||11″ L x 10′ W x 4.5″ D|
|Number of Stages||2|
|Maximum Pressure||20 PSI|
|Valve Connectors||H3 valve, C7 valve, Boston valve & Pinch valve|
Save 20% at Outdoor Master! Just use coupon code HumberSport20 at the checkout.
The OutdoorMaster Shark features dual-stage inflation that ensures precise PSI levels. The first stage includes inflating the SUP at a high rate that goes up to 350 liters per minute.
Once the pressure starts approaching the maximum quantity, the 2nd stage kicks in. The pump works at a slower flow rate when it reaches the 2nd stage, allowing for precise PSI values.
The Shark features a semi-elliptical design with a built-in carry handle that makes it easier for you to carry around. It’s also quite compact and lightweight, weighing just 3.6 lbs. This allows you to store it in your car or on a boat conveniently.
Actually, it’s so small that you can even fit it into your backpack, and it’s one of the main reasons why this electric pump is my favorite.
Not to mention, the pump is made of high-quality ABS material, giving it a premium and durable feel.
Depending on the SUP’s size, the Shark takes as little as 7 minutes and 30 seconds to fully inflate an SUP. Larger SUPs may require an extra minute.
Generally speaking, the Shark is one of the fastest electric pumps I’ve ever seen. Some pumps can take double the time the Shark takes to inflate an SUP.
The Shark shuts off automatically when it reaches the desired PSI reading. This allows you to prepare the rest of your gear while your SUP inflates without worrying about having to shut off the pump manually.
Outstanding Cooling System
One of the things that I really love about this air pump is its robust cooling system. Once the air pump starts overheating, the cooling system starts working automatically until the temperature goes down to normal levels. It takes just a couple of minutes for the temperature to go down.
With the Shark, you can quickly deflate your SUP instead of waiting for it to deflate. I would’ve loved it if the auto-shutoff feature also worked for deflation, but then I’d be just nitpicking.
The Shark is suitable for virtually all SUPs, so you don’t need to worry about special connectors or hoses.
Moreover, it comes with 3 valve connectors, including an H3 valve connector that’s compatible with most SUPs out there. You also have the option to use a Boston, C7, and a pinch valve.
And by the way, you can inflate up to 3 SUPs in a row, meaning that your friends can use it too so that nobody misses any of the fun.
With the Shark, you don’t have to worry about powering the pump up because you get a 12V car connector that allows you to do so using your car’s battery.
You don’t even need to connect it directly to your car’s battery with alligator clips; all you have to do is connect the cord like you’d connect your smartphone.
Just like other SUP air pumps, the Shark produces some noise. However, the noise levels are pretty acceptable. I’ve dealt with much louder air pumps that sound like an airplane engine.
PSI & LCD Screen
The Outdoor Master Shark is equipped with an LCD screen that gives you insights about the pump’s progress. It also makes it easier for you to set the desired PSI value, preventing you from accidentally over-inflating your SUP, which can rupture it.
On that note, don’t forget that each SUP has a recommended PSI level that ensures full inflation while also protecting the SUP from tearing. Even if you get away with a wrong PSI level, you may still experience problems on the water, like high drag, trouble in guidance, and improper floatation.
Some SUPs may require high pressure. Luckily, this pump can inflate those high-pressure SUPs flawlessly. The screen is quite clear and easy to read, even in direct sunlight.
The OutdoorMaster Shark comes with a one-year warranty that covers manufacturing defects and premature failure of internal components. There’s also a 90-day return window. You won’t likely experience any problems with this pump, but a warranty is always good to have, just for peace of mind.
The OutdoorMaster Shark has received several certificates for quality and eco-friendliness, including CA65 and CE certifications.
The OutdoorMaster Shark is a bit more expensive than other air pumps in the same category, but personally, I think it’s worth the extra cash. Even if there are pumps that offer a similar performance level, you just can’t be sure that they’ll stay consistent in the long run, especially if they’re exposed to a high workload.
Save 20% at Outdoor Master! Just use coupon code HumberSport20 at the checkout.
How I Tested It
I usually take specs with a pinch of salt. What really matters to me is the actual real-life performance, so I decided to try out the OutdoorMaster Shark myself.
To test it, I got 3 average-sized SUPs to see how it performs in the toughest scenarios. I inflated 2 of them to 15 PSI, and it took exactly 7 minutes and 15 seconds for the 1st one, while the 2nd one took 7 minutes and 30 seconds.
After inflating the 1st 2 SUPs, I had to let the pump rest for some time as it was starting to overheat. The cooling system kicked in instantly, and it took just a couple of minutes. Then, I started inflating the 3rd SUP, and it took just 7 minutes to be fully inflated.
The whole process took less than 25 minutes, which is quite impressive. The performance of electric pumps usually decreases after the 1st SUP is inflated, but the Shark was able to handle everything I threw at it quite easily.
To see how the OutdoorMaster Shark performs in the long run, I’ve continuously used it for more than 5 months, and I never noticed that the performance dropped by any means. Everything remained intact, and the powerful motor kept on going like a champ.
Frequently Asked Questions
Q. Can I Power the SUP Pump Using a Standard Electric Outlet?
Yes, you can power the sup pump using any nearby electric outlet. However, you’ll need to get a DC connector converter. You can connect the pump to your car using the provided 12V car connector without having to use any extra adapters.
Q. If I Lost One of the Parts in My Pump, Can I Get a Replacement From Outdoor Master?
If you lose any parts within the warranty period, a replacement will be delivered to you free of charge. Just contact the manufacturer at email@example.com.
Q. Can the electric Pump Inflate Multiple Stand Up Paddle boards Without Overheating?
Yes. As I’ve tried out myself, the Outdoormaster SharkII is capable of inflating up to 3 SUPs in a row. However, you may need to let it rest for a minute or two after the 2nd stand up paddleboard until the cooling system cools it down a bit.
Q. What’s the Difference Between the Shark I and Outdoormaster Shark II?
The main difference between the Shark I and II is the heat dissipation system that was introduced in the Shark II. Additionally, the Shark II has a new fan inside. Other than that, both the 1st and 2nd generations are vastly similar.
What’s Included in the Box
The Ourdoormaster Shark II comes ready to use out of the box, and you don’t need to buy extra cords or connectors to start using it. Here’s exactly what the package includes:
- Shark Electric Pump
- 9 ft DC Power Cord
- 4.5 ft Hose
- 4x Valve Connectors
- 3x Gaskets
- 1x Manual
I’ve enjoyed using the OutdoorMaster Shark II every single time. With auto-shutoff, fast speed, and an excellent cooling system, you just can’t go wrong with it. Not to mention, the high PSI capacity and the intuitive LCD screen.
We also appreciate that it’s compatible with almost any SUP you could think of, thanks to its 3 attachment nozzles that fit every SUP brand and model. I highly recommend this air pump for all the paddleboarding enthusiasts out there!